GOR Penalty Relief

Gas oil ratio (GOR) penalties are applied to an oil well’s MRL when the producing GOR exceeds the base GOR. The penalty factor is calculated by taking the ratio of the base GOR to the producing GOR. The MRL is then multiplied by this penalty factor to determine the adjusted MRL (the permitted production rate). GOR penalty relief is applied for under Section 10.060 of the Oil and Gas Conservation Act.

Enter the following information:

1.

Is there gas-cap gas production from the subject pool?
Required

Select No if there is no gas-cap gas production occurring from the pool.

If you select yes, you must answer question 1a.

1a.

If Yes, concurrent production (CCP) approval is required. Does the pool have CCP approval?

Select Yes if the pool has CCP approval.

If you select No, explain the status of the CCP application in 1b.

2.

Is all gas produced from the subject pool conserved?
Required

Select Yes if all the gas produced from the subject pool is conserved.

If you select No, you must answer question 2a.

2a.

If No, a detailed discussion on the feasibility of gas conservation is required. Is this discussion included in the application?

Select Yes if you have included a discussion on the feasibility of gas conservation in the application

.If you select No, you cannot validate this form, add attachments, or register the application until you obtain the detailed discussion is included.

3.

A discussion and analysis of why enhanced oil recovery is not feasible for this pool or well(s) is required. Is this discussion included in the application?
Required

Select Yes if you have included the discussion and analysis on enhanced oil recovery feasibility for this pool or well(s).

If you select No, you cannot validate this form, add attachments, or register the application until you obtain the detailed discussion is included.

See GOR Penalty Relief attachments